Beamsplitters separate incident light into two or more beams of the same wavelength. These exiting beams are differentiated by either their optical power (non-polarizing) or polarization states (polarizing).
Beam splitters specification or based on clients' requirements | |
1.Material | N-BK7,FS or based on clients' requirements |
2.Dimensional tolerances | 0/-0.1mm |
3.Surface flatness | 人/8@633nm |
3.Clear aperture | 100% |
4.Angle accuracy | 10seconds |
5.Surface Quality | US Military Standard 40-20,ISO Standard 3X0.16 |
6.Extinction ratio | 1000:1(Single wavelength),500:1(broadband) |
7.Tp-pol | Tp> 95%(Single wavelength),Tp> 90%(broadband) |
8. Rs-pol | Rs> 99.8%(Single wavelength), Rs> 99.5%(broadband) |
9.Edge Chip | <0.1mm |
10.Bevel | Based on clients' requests |
11.Coating | Based on clients' requests |